Fusion FX Mixing Chamber Swap
Looking to improve your spray foam operation? Harrison from Pinnacle West shows how the Fusion FX mixing chamber changes can be completed in record time, boosting efficiency on the job.
How to Choose Your Reactor 3 Model
In this video, we’ll guide you through the features and benefits of Graco’s Reactor 3 models, helping you decide whether the Standard, Pro, or Elite best fits your operational needs.
Fusion AP & PC Check Valve
Embark on a hands-on journey with Kyle as he disassembles and reassembles the Check Valve Cartridges for the Fusion AP, PC, and MP. This video takes you through the steps, offering a close-up look at the inner workings of these crucial components.
Fusion PC Gun Teardown
The Fusion PC is becoming a fast favourite among Spray Foam installers looking to maximize efficiency and minimize downtime. With it’s trademark quick change cartridge the Fusion PC Spray Foam Gun is exceptionally quick to dismantle and reassemble on the jobsite.
Fusion PC Cartridge Troubleshooting
Let’s take a quick look at the Graco Fusion PC cartridge troubleshooting kit (Graco Part No. 25P660). This package includes a replacement jack screw, grease tool, and divider tool for easy cartridge removal and troubleshooting.
How To Perform a Density Test
In this video we look at what it takes to perform a Density Test on closed cell spray polyurethane foam. Density Testing will help ensure that the product you are spraying meets the manufacturers requirements. But even more important it will ensure you are getting the best yield from your product.
Adhesion & Cohesion Testing
In this video we look at what it take to test spray polyurethane foam for Adhesion and Cohesion. In order to understand how to tell good foam from off-spec foam the first thing a spray foam applicator needs is the right tools to perform quality control observations and testing.
Graco T3 Air Motor Rebuild
How to repair the Graco T3 Transfer Pump air motor with step by step instruction for full rebuild. In this video we will be installing the Graco 25M555 air motor repair kit. The T3 Transfer Pump uses Graco’s proven Merkur air-motor. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required.
Resistance Control Mode
Also referred to as “Resistance Mode”, Resistance Control Mode (RCM) is Graco’s new, patent pending, heated hose temperature control technology. RCM allows you to have full temperature control of your Graco heated hose without the need for an RTD cable and/or a Fluid Temperature Sensor. RCM can be used on all standard Reactor 2 machines with software 4.01.001 or newer installed.
Drum Change Over
In this video we share our method for switching between different materials in a plural component spray system. Example: Switching from 2.0 lb. foam to 0.5 lb. foam or switching from a polyurethane foam to a polyurea coating. This method will allow you to capture most of the material in the proportioner, pumps, hoses etc minimizing waste.
Graco Fusion AP Pressure Imbalance
When spraying polyurethane foam or polyurea coatings pressure imbalance issues are generally caused by restrictions or blockages in the spray gun. In this how to video we will show the common areas these restrictions occur in the Graco Fusion AP spray gun.
Graco Fusion AP Spray Gun Rebuild – Part-1
Part 1 Disassembly – How To repair Graco Fusion Air Purge Plural-Component Spray Gun with step by step instruction for full rebuild. For high output spray polyurethane foam and polyurea applications.
Graco Fusion AP Spray Gun Rebuild – Part-2
Part 2 Assembly – How To repair Graco Fusion Air Purge Plural-Component Spray Gun with step by step instruction for full rebuild. For high output spray polyurethane foam and polyurea applications.
Graco Reactor E-XP2i Startup
Proper maintenance and start up procedures are an important part of insuring long equipment life. In this how-to video we go through the daily start up and maintenance on the integrated series of Graco Reactor.
Graco Reactor E-XP2i Inlet Strainer
The inlet strainers filter out particles that can plug the pump inlet check valves. In this how to video we go through the procedures involved in cleaning the inlet strainers on the integrated series of Graco Reactor.
Constant Run Valve Adjustment
Constant run head unloader adjustment. This valve combines a check valve, pilot valve and discharge valve into one compact system. This video will show you how to adjust the unloader valve for your constant-run compressor.
Graco Daily Start Up with Fusion CS Spray Gun
With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber – increasing your spraying up-time and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.